Side Entry Flanged Forging Ball Valve Trunnion Type With Electric
Actuator
Key features
Soft, metal or composite seated
Two or three piece body
Bi-directional tight shut-off
Double block & bleed
Fire safe and fire tested
Bolted or fully welded construction
Low operating torque design
Wide range of materials and sizes
Trunnion mounted with spring energized seats
Anti-blowout stem design
Suitable for above ground or below ground installation
Benefits
The use of forgings and the independent spring or bellows loaded
floating seats which are always in contact with the ball, make
these valves the preferred solution for various demanding
applications like Cryogenic, High Temperature, Low Emission and ESD
/ HIPPS.
Suitable for use in the most severe services such as scraper
launcher and receiver and hot tapping
Valves can be equipped with bellow seals, steam flushing ports and
protected bearings, to cope with medium/high amounts of solids like
tar sands or catalysts
Approved by the major end users, licensors and contractors and are
designed to meet SIL3 requirements according to IEC 61508
The double or triple stem seal design (with lip seals or o-rings or
optionally with leak off chambers for predictive maintenance) mean
that the valves meet and exceed the most stringent Low Fugitive
Emissions Norms (ISO 15848) making our valves suitable to handle
toxic or lethal fluid services
Spring or floating seats which are always in contact with the ball
provide an effective tight seal even at low differential pressure
| Ball Valve Type | Design and Manufacture | Face to Face/End to End | Flange Dimensions | Pressure Temperature Rating | Inspection and Test |
| Split Flange ball valve | BS5351 | ANSI B16.10 | ANSI B16.5 | ANSI B16.34 | API6D |
| Fixed flange ball valve | API6D/API608 | API6D | ANSI B16.47 | ANSI B16.34 | API598 |
Main Material
| Body material | Trim material | Seal material | Gasket/Packing |
| WCB/LCB/CF8/CF8M/CF3/CF3M,ETC. | SS410, SS420, SS304, SS316,ETC | PTFE, RPTFE, PEEK, PPL, ETC. | GRAPHITE. PTFE, PPL. ETC.
|
Design Feature
1: Full bore or reduced bore
2: Two-piece or Three-piece body structure
3: Double Block & Bleed, Double isolation and
bleed(DIB-1&DIB-2)
4: Fire safe design(API 607)
5: Blowout-proof system
6: Anti-static design
7: Self cavity relief
8: Fugitive emission testing(optional)
Design Data
Design standard: API 6D,DIN3357-1 , EN12516-1
Face to Face standard: API6D, ASME B16.10, DIN3202
Connecting Standard: ASME B 16.5, ASME B16.47, DIN 2543/4,ASME B
16.25
Test & Inspect Standard: API 6D ,API 598
Working Temperature: -196℃~610℃
Connection type: RF,RTJ,FF,BW.BSPT,NPT
Sour environment:NACE MR0175
